Ranges: 2-14″, 5-72″, 10-240″
Broad Beam Sensor
On/Off Output, analog capability

Product Description

  • Various Sensing Ranges
  • Broad Sensing Beam
  • Low Frequency – 38.5kHz
  • 2 – Way Power Operation
  • Small Remote Transducers
  • Adjustable Delay Controls
  • 2 Multiplexed Transducers
  • LED Indicator
  • Isolated Form C Relay Output
  • Small Electronic Controller

The RPS-100 is the first of the RPS series and has a proven track record of reliability. Since its introduction in 1979, the RPS-100 has proven itself in versatility and ease of operation. The remote transducer allows for mounting of the sensor head in cramped spaces while the controller is out of the way. The ranging and proximity modes provide the versatility of simple detection, or actual distance measuring.

The isolated form C relay furnishes N.O. and N.C. outputs, and with the addition of the RPS-500 card various analog outputs are supplied. The RPS-100 sensor, which operates at a frequency of 38.5kHz, has a broad sensing beam which allows for detection of an object at greater angles of tilt. Sensing ranges available for the RPS-100 include 2″ to 14″, 5″ to 72″, and 10″ to 240″. Mounting flanges, LED indicator, ranging potentiometer, and 6-ft. transducer cable are included. Optional cable lengths are available.

[Download not found]

Proximity Detection

Proximity detection is the detection of an object in a given range. The detection range of the RPS-100 is controlled by the “Range Control” potentiometer located on the front cover of the controller. Any object within the desired range is detected, while objects out of range are ignored. The detect point is independent of size, material, and reflectivity.

With the addition of the RPS-500 card, Analog outputs of 0-10 VDC and 4-20 mA are provided. Precise distances of an object moving to and from the transducer are measured via time intervals between transmitted and reflected bursts of ultrasonic sound. The example shows a target detected at 6 inches from the transducer and moving to 10 inches. The distance change is continuously calculated and outputted. Ranging Option is indicated by following the part number with (-500). (Example: RPS-100-14-500)

Product Specifications:
Operational Range: Adjustable 2″ to 14″
Adjustable 5″ to 72″
Adjustable 10″ to 240″
Power Input: 120VAC
* Only 120VAC or 24VDC 15 – 24VDC
with 500 Analog card.
120VAC
15-24 VDC
12VDC Regulated
12 – 17VAC
Input Current:
Input Current with 500 card:
Ambient Temperature:
30 Milliamps
50 Milliamps
0ºC to 60ºC
or 32ºF to 140ºF
Controller:
Transducer:
Transducer Housing:
Output: N.O., N.C.
Metal Enclosed
Aluminum
Plastic
Isolated Form C Relay
.5 Amp Maximum
at 120VAC
12VDC Logic Signal
Output with 500 card: 0 – 10VDC, 4 – 20 mA
Analog Outputs
with Zero, Span, Sample,
and Hold controls.
Transducer Frequency: 38.5kHz
Response Time: 2″ to 14″ 5″ to 72″ 10″ to 240″
30mS – On 100mS – On 250mS – On
30mS – Off 100mS – Off 250mS – Off
Weight of Controller: 34.2 ounces
Weight of Transducer: 2.2 ounces

Figure:

  1. Angle of Tilt
  2. Beam Spread
  3. Wiring Diag. – For RPS-100
  4. Wiring Diag. – For RPS-500
  5. Mounting Dimensions*Dimension changes from 2.5″ to 3.75″ when ordered with the 500 Analog Ranging card.

 

PART NUMBER RANGE OUTPUT
RPS-100-14
RPS-100-72
RPS-100-240
2″ – 14″
5″ – 72″
10″ – 240″
Isolated Form C Relay
Isolated Form C Relay
Isolated Form C Relay
RPS-100-14-500
RPS-100-72-500
RPS-100-240-500
2″ – 14″
5″ – 72″
10″ – 240″
0 – 10VDC and 4 – 20 mA Analog
0 – 10VDC and 4 – 20 mA Analog
0 – 10VDC and 4 – 20 mA Analog